Numerical Algorithms Group: NAG |
|
xmltex: A non validating (and not 100% conforming) namespace aware XML parser implemented in TeX |
xmltex implements a non validating parser for documents matching the W3C XML Namespaces Recommendation. The system may just be used to parse the file (expanding entity references and normalising namespace declarations) in which case it records a trace of the parse on the terminal. Normally however the information from the parse is used to trigger TeX typesetting code. Declarations (in TeX syntax) are provided as part of xmltex to associate TeX code with the start and end of each XML element, attributes, processing instructions, and with unicode character data.
The xmltex parser itself does not require LaTeX. It may be loaded into initex to produce a format capable of parsing XML files. However such a format would have no convenient commands for typesetting, and so normally xmltex will be used on top of an existing format, normally LaTeX. In this section we assume that the document to be processed is called document.xml.
LaTeX requires a document in TeX syntax, not XML. To process document.xml, first produce a two line file called document.tex of the following form:
\def\xmlfile{document.xml}
\input xmltex.tex
Do not put any other commands in this file!
You may then process the document with either of the commands: latex document or latex document.tex or the equivalent procedure in your TeX environment.
You may prefer to set up xmltex as a format in its own right. This may speed things up slightly (as xmltex.tex does not have to be read each time) but more importantly perhaps it allows the XML file to be processed directly without needing to make the .tex wrapper.
To make a format you will need a command such as the following, depending on your TeX system.
initex &latex xmltex initex \&latex xmltex tex -ini &latex xmltex tex -ini \&latex xmltex
This will produce a format file xmltex.fmt. You should then be able to make a xmltex command by copying the way the latex command is defined in terms of latex.fmt. Depending on the TeX system, this might be a symbolic link, or a shell script, or batch file, or a configuration option in a setup menu.
Whilst it may be convenient to build an xmltex format as above, starting from the LaTeX format. You may prefer to instead work with an initex with no existing format file. Even if you wish to use a standard LaTeX it may be preferable to make a TeX input file that first inputs latex.ltx then xmltex.tex. In particular this will allow you to have a different hyphenation and language customisation for xmltex than for LaTeX. Many of the features of the language support in LaTeX are related to modifying the input syntax to be more convenient. Such changes are not needed in xmltex as the input syntax is always XML. Some language files may change the meaning of such characters as < which would break the xmltex parser. Also, rather than using latex.ltx you could in principle use a modified docstrip install file and produce a `cut down' latex that did not have features that are not going to be used in xmltex.
Unfortunately the support for this method of building xmltex (and access to non English hyphenation generally) is not fully designed and totally undocumented.
xmltex by default `knows' nothing about any particular type of XML file, and so needs to load external files containing specific information. This section describes how the information in the XML file determines which files will be loaded.
As discussed above, xmltex requires a mapping between PUBLIC and SYSTEM identifiers, namespace URI, and element names, to files of TeX code. This mapping is implemented by the following commands:
\NAMESPACE{URI}{xmt-file}
\PUBLIC{FPI}{file}
\SYSTEM{URI}{file}
\NAME{element-name}{xmt-file}
\XMLNS{element-name}{URI}
As described above, if the first argument of one of these commands
matches the string specified in the XML source file, the corresponding
TeX commands in the file specified in the second argument are
loaded. The PUBLIC and SYSTEM catalogue entries may also be used
to control which XML files should be input in response to external
entity references. The \XMLNS is rather different,
if an element in the null namespace does not have any definition
attatched to it, this declaration forces the default namespace to the
given URI. The catalogue lookup is then repeated. This allows for
example documents beginning <html> to be coerced into
the xhtml namespace.
These commands may be placed in a configuration file, either xmltex.cfg, in which case they apply to all documents, or in a configuration file `\jobname.cfg' (eg document.cfg in the example in the Introduction) in which case the commands just apply to the specified document.
In addition to the `catalogue' commands described earlier there are other commands that may be placed in the configuration files.
\xmltraceonly
This stops xml from trying to typeset the document. The external files specified in the catalogue are still loaded, so that the trace may report any elements for which no code is defined, but no actual typesetting takes place. In the event of unknown errors it is always worth using xmltex in this mode to isolate any problems.
It may be noted that if an xmltex format is built just using initex without any typesetting commands, the resulting format should still be able to parse any XML file if xmltex.cfg just specifies \xmltraceonly and \jobname.cfg is empty.
\xmltraceoff
By default xmltex provides a trace of its XML parse, displaying each element begin and end. This command used in xmltex.cfg or `\jobname.cfg' will stop this trace being produced.
\inputonce{xmt-file}
The catalogue entries specify that certain files should be loaded if XML constructs are met. Alternatively the files may just always be loaded. The system will ignore any later requests to load. This is especially useful if an xmltex format is being made.
\UnicodeCharacter{hex-or-dec}{tex-code}
The first argument specifies a unicode character number, in the same format as used for XML character entities, namely either a decimal number, or an upper case Hex number preceded by a lower case `x'.
The second argument specifies arbitrary TeX code to be used when typesetting this character. Any code in the XML range may be specified (ie up to x10FFFF). Although codes in the `ASCII' range, below 128, may be specified, the definitions supplied for such characters will not be default be used. The definition will howeverbe stored and used if the character is activated using the command described below.
\ActivateASCII{hex-or-dec}
The argument to this command should be a number less than 128. If a character us activated by this command in a configuration file then any special typesetting instructions specified for the character will be executed whenever the character appears as character data.
Some ASCII characters are activated by default. The list is essentially those characters with special meanings to either TeX or XML.
If a format is being made, there are essentially two copies of xmltex.cfg that may play a role. The configuration file input when the format is made will control catalogue entries and packages built into the format. A possibly different xmltex.cfg may be used in the input path of `normal' TeX, this will then be used for additional information loaded each run.
In either case, a separate configuration file specific to the given XML document may also be used (which is loaded immediately after xmltex.cfg).
xmltex should stop after the end of the document element has been processed. If things go wrong and you end up at the interactive * prompt you might want to exit with <?xmltex \stop?>).
xmltex package files are the link between the XML markup and TeX typesetting code. They are written in TeX (rather than XML) syntax and may load directly or indirectly other files, including LaTeX class and package files. For example a file loaded for a particular document type may directly execute \LoadClass{article}, or alternatively it may cause some XML element in the document to execute \documentclass{article}. In either case the document will suffer the dubious benefit of being formatted based on the style implemented in article.cls. Beware though that the package files may be loaded at strange times, the first time a given namespace is declared in a document, and so the code should be written to work if loaded inside a local group.
Characters in xmltex package files have their normal LaTeX meanings except that line endings are ignored so that you do not need to add a % to the end of lines in macro code. Unlike fd file conventions, other white space is not ignored.
The available commands are:
\FileEncoding{encoding}
This is the analogue for TeX syntax files of the encoding specification in the XML or text declaration of XML files. If it is not specified the file will be assumed to be in UTF-8.
\DeclareNamespace{prefix}{URI}
This declares a prefix to be used in this file for referring to elements in the specified namespace. If the prefix is empty then this declares the default namespace (otherwise, unprefixed element names refer to elements that are not in a namespace).
Note that the elements in the XML document instance may use a different prefix, or no prefix at all to access this namespace. In order to resolve these different prefixes for the same namespace, each time a namespace is encountered for the first time (either by \DeclareNamespace in a preloaded package, or in a namespace declaration in the XML instance) then it is allocated a new number and any further namespace declaration for the same URI just locally associates a prefix with this number. It is these numbers that are displayed when the XML trace of the parse of the document is shown, and also if any element is written out to an external file it will have a normalised prefix of a number whichever prefix it had originally. (Numeric prefixes are not legal XML, but this is an advantage, it ensures these internal forms can not clash with any prefix actually used in the document.)
Three namespaces are predeclared. The null namespace (0), the XML namespace (http://www.w3.org/1998/xml) (1) which is predeclaed with prefix xml as specified in the Namespace Recommendation, and the xmltex namespace (http://www.dcarlisle.demon.co.uk/xmltex) (2) which is not given a default prefix, but may be used to have XML syntax for some internal commands (eg to have .aux files fully in XML, currently they are a hybrid mixture of some TeX and some XML syntax).
\XMLelement{element-qname}{attribute-spec} {begin-code}{end-code}
This is similar to a LaTeX \newenvironment command.
Declare the code to execute at the start and end of each instance of this element type. This code will be executed in a local group (like a LaTeX environment). The second argument declares a list of attributes and their default values using the \XMLattribute command described below.
\XMLelement{element-qname} {attribute-spec} {\xmlgrab}{end-code}
A special case of the above command (which may be better made into a separate declaration) is to make the start-code just be the command \xmlgrab. In this case the end-code has access to the element content (in XML syntax) as #1. This content isn't literally the same as the original document, namespaces, white space and attribute quote symbols will all have been normalised.
\XMLattribute{attribute-qname} {command-name}{default}
This command may only be used in the argument to \XMLelement. The first argument specifies the name of an attribute (using any namespace prefixes current for this package file, which need not be the same as the prefixes used in the document). The second argument gives a TeX command name that will be used to access the value of this attribute in the begin and end code for the element. (Note using TeX syntax here provides a name independednt of the namespace declarations that are in scope when this code is executed). The third argument provides a default value that wil be used if the attribute is not used on an instance of this element.
The special token \inherit may be used which will cause the command to have a value set in an ancestor element if this element does not specify any value.
If a TeX token such as \relax is used as the default the element code may distinguish the case that the attribute is not used in the document.
\XMLnamespaceattribute {prefix}{attribute-qname} {command-name}{default}
This command is similar to \XMLattribute but is used at the top level of the package file, not in the argument to \XMLelement. It is equivalent to specifying the attribute in every element in the namespace specified by the first argument. As usual the prefix (which may be {} to denote the default namespace) refers to the namespace declarations in the xmltex package: the prefixes used in the document may be different.
\XMLentity{name}{code}
Declare an (internal parsed) entity, this is equivalent to a <!ENTITY declaration, except that the replacement text is specified in TeX syntax.
\XMLname{name}{command-name}
Declare the TeX command to hold the (normalised, internal form) of the XML name given in the first argument. This allows the code specified in \XMLelement to refer to XML element names without knowing the encodings or namespace prefixes used in the document. Of particular use might be to compare such a name with \ifx\XML@parent which will allow element code to take different actions depending on the parent of the current element.
\XMLstring{command-name}<>XML Data</>
This saves the XML fragment as the TeX command given in the first argument. It may be particularly useful for redefining `fixed strings' that are generated by LaTeX document classes to use any special typesetting rules specified for individual characters.
It should also be used for defining any strings used to in comparison tests with strings occurring in the XML document. Using \XMLstring rather than \def ensures that the characters and encodings in the string are correctly normalised.
xmltex tries as far as possible to be a fully conforming non validating parser. It fails in the following respects.
A non validating parser is not forced to read external dtd entities (and this one does not) It is obliged to read the local subset and process entity definitions and attribute declarations. Entity declarations are reasonably well handled: External parameter entities are handled as above, loading a corresponding xmltex file if known. External entities are similarly processed, inputting the XML file, a difference in this case is that if the entity is not found in the catalogue, the SYSTEM identifier will be used directly to \input as often this is a local file reference. Internal parsed entities and parameter entities are essentially treated as TeX macros, and nonparsed entities are saved along with their NDATA type, for use presumably by \includegraphics.
Attribute defaults are processed in the local subset of the dtd, however note that this is `namespace unaware' defaulting and only applies to elements using the same prefix and local name, unlike the defaulting done by \XMLattribute.
Support for encodings depends on having an encoding mapping file. Any 8bit encoding that matches Unicode for the first 127 positions may be used by making a trivial mapping file. (The one for latin1 looks over complicated as it programs a loop rather than having 127 declarations saying that latin1 and Unicode are identical in this range).
UTF-8 is supported, but support for UTF-16 is minimal. Currently only latin-1 values work: (In this range UTF-16 is just latin-1 with a null byte inserted after (or before, depending on endedness) each latin-1 byte. The UTF-16 implementation just ignores this null byte then processes as for latin-1. Probably the first few 8bit pages could be similarly supported by making the low ascii control characters activate UTF-16 processing but this will never be satisfactory using a standard TeX. Hopefully a setup for a 16bit TeX such as Omega will correct this.
In theory you should be able to control the document just be suitable code specified by \XMLelement and friends, but sometimes it may be necessary to `tweak' the output by placing commands directly in the source.
Two mechanisms are availalable to do this.
Using the xmltex namespace. The xmltex namespace conatins a small (currently empty) set of useful TeX constructs that are accessed by XML syntax. For example if xmltex provides a mechanism for having XML (rather than LaTeX) syntax toc files, it will need an analogue of \contentsline which might be an element accessed by <xmltex:contentsline>… where the xmltex prefix is declared on this or a parent element to be xmlns:xmltex="http://www.dcarlisle.demon.co.uk/xmltex".
As the xmltex namespace is declared but currently empty, a more useful variant of this might be:
\DeclareNamespace{tweak}{"/my/tex/tweak"}
\XMLelement{tweak:clearpage}{\clearpage}
A second different mechanism is available, to use XML processing instructions. A Processing Instruction of the form: <?xmltex> TeX commands ?> will execute the TeX commands.
None, of course.
Thus section discusses some of the more experimental features of xmltex that may get a cleaner syntax (or be removed, as a bad idea) in later releases, and also describes some of the internal interfaces (which are also subject to change)
At any point while processing a document, xmltex is in one of two states: tex or xml.
In the xml state, < and & are the only two characters that trigger special markup codes. Other characters, such as !, >, =, … may be used in certain XML constructs as markup but unless some code has been triggered by < they are treated simply as character data. All characters above 127 are `active' to TeX and are used to translate the input encoding to UTF-8. All internal character handling is based on UTF-8, as described below. Some characters in the ASCII range, below 127 are also active by default (mainly punctuation characters used in XML constructs, such as the ones listed above). Some or all of the others may be activated using the \ActivateASCII command, which allows special typesetting rules to be activated for the characters, at some cost in processing speed.
In the tex state, characters in the ASCII range have their usual TeX meanings, so letters are `catcode 11' and may be used in TeX control sequences, \ is the escape character, & the table cell separator, etc. Characters above 127 have the meanings current for the current encoding just as for the xml state, probably this means that they are unusable in TeX code, except for the special case of referring to XML element names in the first argument to \XMLelement and releated commands.
Whenever a new (XML or TeX) file is input by the xmltex system the encoding is first switched to UTF-8. At the end of the input the encoding is returned to whatever was the current encoding. The encoding current while the file is read is determined by the encoding pseudo-attribute on the XML or text declaration in the case of XML files, or by the \FileEncoding command for TeX files. Note that the encoding mechanism only is triggered by xmltex file includes. Once an xmltex package file is loaded it may include other TeX files by \input or \includepackage these input command swill be transparent to the xmltex encoding system. The vast majority of TeX macro packages only use ASCII characters so this should not be a problem.
Note that if the \includepackage occurs directly in the xmltex package file, the TeX code will be included with a known encoding, the one specified in the xmltex package, or UTF-8. If however the \includepackage is included in code specified by \XMLelement, then it will be executed with whatever encoding is current in the document at the point that element is reached. Before xmltex executes the code for that element it will switch to the tex state, thus normalising the ascii characters but characters above 127 will not have predefined definitions in this case.
Internally eveything is stored as UTF-8. So `aux' and `toc' files will be in UTF-8 even if the document (or parts of the document) used different encodings.
To specify a new encoding, if it is an 8 bit encoding that matches ASCII in the printable ASCII range, then one just needs to produce a file with name encoding.xmt (in lowercase, on case sensitive systems) this should consist of a series of \InputCharacter commands, giving the input character slot and the equivalent Unicode. If an encoding is specified in this manner character data will be converted to UTF-8 by expansion and so ligatures and inter letter kerns will be preserved. (Conversely if characers are accessed by character references, Ӓ then TeX arithmetic is used to decode the information and ligature information will be lost. For some large character sets, especially for Asian languages, these mechanisms will probably not prove to be sufficient, some mechanisms are being investigated, but in the short term it may be necessary to always use UTF-8 if the input encoding is not strictly a ine byte extension of the ASCII code page.
You can use arbitrary TeX commands in an xmltex package, althought you should be aware that the file may be input into a local group, at the point in a document that a particular namespace is first used, for example. There are however some specific commands designed to be used in the begin or end code of \XMLElement.
\ignorespaces
This is actually a TeX primitive (for the moment!)
\obeyspaces
Obey consecutive space characters, rather than treating consecutive runs as a single space. (A command of this name, but not this definition is in plain TeX.)
\obeylines
Obey end of line characters, rather than treating then as a space, force a line break. (A command of this name, but not this definition is in plain TeX.)
\xmltexfirstchild#1\@
If the start-code for an element is specified as \xmlgrab then the end-code may use #1 in order to execute the element content. Sometimes you do not want all of the content. The a construction (with currently unpleasant syntax) \xmltexfirstchild#1\@ will just evaluate the first child element of the content, discarding the remaining elements.
\xmltextwochildren\csa\csb#1
If you know that the content will be exactly two child elements (for examle a MathML frac or sub element) then this command may be used. It will execute the TeX code \csa{child-1}\csb{child-2 So either two TeX command smay be supplied, one will be applied to each child, or the second argument may be {} in which case the first argument may be a TeX command that takes two arguments. For example the code for MathMl frac might be
\XMLelement{m:mfrac}
{}
{\xmlgrab}
{\xmltextwochildren\frac{}#1}
\xmltexthreechildren\csa\csb\csc#1
As above, but more so.
\xmltexforall\csa{#1}
The TeX command \csa is called repeatedly, taking each child element of the current element as argument on each iteration. As a convenience the command \xml@name is defined before each iteration to have the (internal, normalised) name of the element being processed.
\NDATAEntity\csa\csb\attvalue
If the XML parser encounters an internalor external entity reference it expands it without executing any special hook that may be defined in an xmltex package. However NDATA entites are never directly encountered in an entity reference. They may only be used as an attribute value. If \attvalue. is a TeX command holding the value of an attribute, as declared in \XMLattribute then \NDATAEntity\csa\csb\attvalue applies the two TeX commands \csa and \csb to the notation type and the value, in a way exactly corresponding to \xmltextwochildren so for example the XML document for this manual specifies
<!NOTATION URL SYSTEM "" > <!ENTITY lppl SYSTEM "http://www.latex-project.org/lppl.txt" NDATA URL>and this is handled by the following xmltex code
\XMLelement{xptr}
{\XMLattribute{doc}{\xptrdoc}{}}
{\NDATAEntity\xptrdoc\@gobble\url}
{}
which saves the attribute value in \xptrdoc and then
discards the notation name (URL) and applies the command
\url to typeset the supplied URL.
| int. | ext. xml | ext. mixed | csn typeout | |||
| d | xabc | xabc | xabc (12) | xabc (12) | xabc (12) | |
| c | xab | xab | xab (12) | xab (12) | xab (12) | |
| b | xa | xa | xa (12) | xa (12) | xa (12) | |
| ax | x | x | x | x | x (12) | (!) |
| ay | x | x | x | { | x (12) | (e) |
| az | x | \az x | { | { | x (12) | (<) |
| < | < | < | < | < | < (12) | (<) |